安裝前不要打開淮安INA軸承總成。一般油脂潤滑，不干凈，直接注入油脂。潤滑油潤滑時，一般不需要清洗，但要用儀器或高速軸承，如用清潔的機油清洗，去除軸承上涂的防銹劑。軸承用防銹劑去除后容易生銹，不能擱置。此外，用潤滑脂密封的軸承可直接使用而無需清洗。

Do not open Huaian INA bearing assembly before installation. General grease lubrication, not clean, direct injection of grease. Lubricant lubrication, generally do not need cleaning, but to use instruments or high-speed bearings, such as cleaning with clean oil, remove the anti-rust agent coated on the bearings. Bearings are easy to rust after being removed with antirust agent and can not be shelved. In addition, bearings sealed with grease can be used directly without cleaning.

軸承的安裝方法因軸承的結構、配合和狀況而異。通常，內環需要過盈配合，因為它主要圍繞軸旋轉。圓柱孔軸承通常用壓力機或熱填料壓緊。對于錐形孔，它們直接安裝在錐形軸上或帶有套筒。

The installation b of bearings varies according to the structure, fit and condition of bearings. Usually, the inner ring needs interference fit because it rotates mainly around the axis. Cylindrical hole bearings are usually compacted by press or hot packing. For conical holes, they are mounted directly on the conical axis or with sleeves.

當安裝淮安INA軸承在外殼上時，通常有許多間隙配合，并且外圈有多余的間隙。壓力機通常用于壓制或冷凝。冷凝后安裝。當使用干冰作為冷凝液并結合冷凝和安裝時，空氣中的水分將在軸承表面凝結。因此，需要采取適當的防銹措施。

When installing Huaian INA bearing on the outer shell, there are usually many bance matches, and the outer ring has surplus bance. Presses are usually used for pressing or condensing. Installation after condensation. When dry ice is used as condensate and combined with condensation and installation, moisture in the air will condense on the bearing surface. Therefore, appropriate anti-rust measures need to be taken.

軸承的拆卸應定期進行，并在更換軸承時進行。拆卸后，如果繼續使用，或需要檢查軸承的狀態，其拆卸應與安裝一樣小心。應注意軸承零件的拆卸，特別是過盈配合軸承，這是很難操作的。

The disassembly of bearings should be carried out regularly and when the bearings are replaced. After disassembly, if you continue to use, or need to check the status of bearings, its disassembly should be as careful as installation. Attention should be paid to the disassembly of bearing parts, especially interference fit bearings, which is difficult to operate.

根據需要設計和制造拆卸工具也很重要。拆卸淮安INA軸承時，根據圖紙研究軸承的拆卸方法、順序和匹配條件，確保拆卸操作的安穩。

It is also important to design and manufacture disassembly tools as needed. When disassembling Huaian INA bearing, the disassembly b, sequence and matching conditions are studied according to the drawings to ensure the stability of disassembly operation.

拆下過盈配合的外圈。在外殼的圓周上預先設置有帶多個擠壓環螺桿的螺桿。螺釘在一側均勻擰緊，在另一側拆卸。這些孔通常由單獨的軸承覆蓋，如塞子和圓錐滾子軸承。殼蓋的肩部設有若干凹槽。使用墊圈，按壓或輕敲以拆卸螺孔。

Remove the outer ring of interference fit. A screw with multiple extrusion ring screw is pre-arranged on the circumference of the outer shell. The screw is tightened evenly on one side and disassembled on the other. These holes are usually covered by separate bearings, such as plugs and tapered roller bearings. The shoulder of the shell cover is provided with a number of grooves. Use gaskets, press or tap to remove the screw holes.

內環可以很容易地用壓力機拔出。此時，應注意讓內環承受其張力。此外，圖中所示的淮安INA軸承拔出夾主要使用。無論哪種卡箍，都務必牢固地卡在內環的側面。因此，為了使用拉拔夾具，有必要考慮肩的尺寸或研究肩槽的加工工藝。

The inner ring can be easily pulled out by a press. At this time, attention should be paid to let the inner ring bear its tension. In addition, the Huaian INA bearing pull-out clamp shown in the figure is mainly used. No matter what kind of clamp, it must be firmly stuck on the side of the inner ring. Therefore, in order to use drawing fixture, it is necessary to consider the size of shoulder or study the processing technology of shoulder groove.

大軸承內環采用液壓方法拆卸。通過軸承上的油孔施加油壓，使其易于抽出。軸承寬度通過液壓方法、拉伸、夾緊和拆卸操作。

The inner ring of large bearing is disassembled by hydraulic b. The oil pressure is applied through the oil hole on the bearing to make it easy to extract. Bearing b is operated by hydraulic b, stretching, clamping and disassembly.

感應加熱可以用來拆卸圓柱滾子淮安INA軸承的內環。內環加熱拉拔，內環在短時間內膨脹。當需要安裝大量此類軸承內圈時，也可以使用感應加熱。

Induction heating can be used to remove the inner ring of Huaian INA bearing with cylindrical roller. The inner ring is heated and drawn, and the inner ring expands in a short time. Induction heating can also be used when a large number of such bearing inner rings need to be installed.

拆卸和檢查軸承時，應先用攝影記錄軸承的外觀。此外，在清潔軸承之前，務必確認殘留潤滑劑的數量，并且須對潤滑劑進行取樣。

When disassembling and inspecting bearings, the appearance of bearings should be recorded by photography first. In addition, before cleaning bearings, it is important to confirm the amount of residual lubricants and to sample lubricants.

文章來自：淮安SKF軸承 www.wh-skf.com

Article from: Huaian SKF Bearing www.wh-skf.com

文章來自：淮安INA軸承 www.ina-china.cn

Article from: Huaian INA Bearing www.ina-China.cn

文章來自：淮安NSK軸承 www.klbbearings.com

Article from: Huaian NSK Bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757